PHP My Admin

Recent Posts

Pages: [1] 2 3 ... 10
1
Hobby / Re: They came from the trenches
« Last post by Cammerz on April 27, 2023, 07:02:30 pm »
Update time:

There isn't currently a datasheet for a Chaplain in Gravis Armoutr but I wasn't going to let that deter me. They do have a datasheet for a Chaplain in Terminator Armour and they're roughly the same build so fluff-wise he's in one suit of armour and crunch-wise he's in another.

I had a trio of push-fit Aggressors lying around (the other two will eventually join a fresh box of three to create a unit of five, gotta have those flame weapons) and the Sergeant seemed sufficiently laden with relics to be my base model. I swapped his arms out for some Dark Angels Terminator arms with Heavy Intercessor shoulder pads (it turns out that Gravis marines and Terminators have the same size shoulders) and removed the ammo drums on the Aggressor backpack in favour of basic exhaust vents that I took from a standard Intercessor backpack. The head is from a Primaris Reiver and the bannerpole is either from the Mk III or Mk IV Horus Heresy marines.

Enjoy;

2
Hobby / Re: Carmine Blades Crusade
« Last post by Cammerz on April 19, 2023, 08:42:37 pm »
Presenting Squad Moria, named for their Sergeant Rafah Moria whose name came from a random Blood Angels name generator I found online.

My second unit of Primaris Eliminators (third if you want to include the Alpha Legion ones, which can now be found in my other post since I have fixed the image problem). My Carmine Blades already have Squad Kanatis (with the las fusils), Squad Moria are equipped with the Bolt Sniper Rifles so maybe I'll be able to take out that damnable Death Guard Foul Blightspawn.

Once more a lot of work went into the camo cloaks but unfortunately the sergeant's cloak didn't turn out right. I painted the triangles too large which was immediately obvious to anyone when he was sat near my other five Eliminators or Captain Turah. This left me with two options: 1) Start again, 2) Fully paint his camo cloak in the camouflaged pattern instead of mid-transformation. I almost immediately settled on the latter.



3
Hobby / Re: Carmine Blades Crusade
« Last post by Cammerz on March 17, 2023, 08:44:46 pm »
I'm back, for we have completed the first round of our Crusade campaign.

5x players, we faced each other player twice for a total of 8 games each.
I opted to use two different army lists and give each one an outing against each enemy faction,

The first patrol consisted of; Lieutenant Arto, 5x Reivers, 5x Infiltrators, 3x Suppressors and 3x Eliminators. This list did not perform well, some matches were close, others went very poorly and I was down 0-4 at the end of the first half.
The second patrol consisted of: Brother Castandro the Sanguinary Priest, 5x Sanguinary Guard, 5x Incursors and Persephyka Shayde the Culexus Assassin. This list either did very well or very badly, mostly dependant on whether the Sanguinary Guard survived. In their first game they rolled very poorly (new model syndrome is real), in another they received a turn 1 charge from some very angry Sisters Repentia (that game was probably decided by the roll to see who went first), whereas this list performed very well against Ad Mech and Necrons. At the end of the second half, the score was 2-6.

This particular Campaign has fixed points at which our Crusade Rosters and Army Lists each increase by 250pts. So I shall be playing 750pt games from a Roster of 1250. The lastest Munitorum Field Manual saw numerous points drops (to make up for the loss of Armour of Contempt) and I have been hard at work preparing for the next round.

Firstly, I have increased the size of my Reiver squad to 10 (they haven't performed very well so far, maybe returning to my ancient Orkish ways (rolling buckets of dice) will succeed where they have been failing so far). I also already had 10 Reivers (as shown above), so that was easy.

Now we move on to the first new model. Clearly displeased by the poor performance of his Lieutenant, the Captain of the Carmine Blades 10th Company is taking to the field himself...

Presenting the Master of Recruits and Recconnaisance, Taharius Turah







More to follow as I finish painting it.
4
Introduce Yourself / Re: Hello There
« Last post by Mabbz on January 24, 2023, 08:58:52 am »
Heya! Welcome back! Looking forward to seeing what you have.

Just so you know, we also have a discord:
https://discord.com/channels/894688647251628102/894688648916791299
5
Introduce Yourself / Hello There
« Last post by OracleOfCanin on January 24, 2023, 07:24:11 am »
I heard about this site when I was looking into what happened to a forum I used to post on ages ago. I was really impressed by some of the community projects that were done and I intend to share some of what I happened to save.  ;D
6
Hobby / Re: They came from the trenches
« Last post by Narric on December 23, 2022, 04:43:49 pm »
Continued excellent work, Cammerz!
7
Hobby / Re: They came from the trenches
« Last post by Cammerz on December 15, 2022, 10:12:34 pm »
Well that didn't take too long;

Presenting my Ironclad Dreadnought:






As the toughest of all Dreadnoughts I decided that the Ironclad fitted best with the Outcast Anvils. Whilst the background for the chapter mostly revolves around the Firstborn banishing the Primaris to a world of total war, such an policy is likely to have its detractors and this is as good a way as any to make them disappear too.

I intend to put him on the table with the weapon loadout from the first image but I figured I might as well paint both as you don't need to glue any of the arms in place. I also magnetised the waist for limited posability but the bond isn't very strong so after their first outing on the battlefield tomorrow I might just decide to pick a pose and glue the sarcophagus to the waist.

The hunter-killer missile array is constructed from the magna-grapple from a Blood Angels Furioso Dreadnought with the warheads of the actual Ironclad's HKs sliced off and attached to the component.


And so, my first 500pts of Outcast Anvils are complete, here's a group photo to celebrate...

8
Hobby / Re: They came from the trenches
« Last post by Cammerz on December 14, 2022, 07:03:18 am »
And here they are, the line infantry of the Outcast Anvils. As there are so few of them I have been painting each model individually rather than in a batch. It may have taken longer but I have preferred it and it probably kept my motivation up. It certainly helps that each model isn't that time consuming as, unlike the Carmine Blades, I'm not layering every individual armour panel.





As they come in the Heavy Intercessor box with the only addition of the Spellcrow loincloths.

While painting this unit I began to consider the squad and company markings of the Outcast Anvils. I want to stick quite closely to the Codex Astartes for this one but instead of the trims of the shoulder pads being in the company colour, I have opted to show it with the battlefield icon instead (tactical arrow for Battleline, assault symbol for Close Support, devastator for Fire Support, skull for Command). By having black symbols with white squad numbers (both from the Tome Keepers transfer sheets that came with a couple of White Dwarfs), I have marked these out as the 5th company. In addition, I have decided that the sergeants will be marked out my having the company colour instead of the usual drab green for their helmets.

As they're designed as if purging heretics alongside an Inquisitor and, presumably, the local Imperial Guard, I decided to go all out on relics and purity seals. Not a single model will be without both in this army, although the next model will almost be a Relic in its own right, stay tuned.
9
Hobby / Re: They came from the trenches
« Last post by Cammerz on November 17, 2022, 07:26:41 pm »
And now for my Inquisitor's first big friend, the Captain of my Outcast Anvils.

On the tabletop he will be given the Forge Master Warlord Trait and the relic, The Salamander's Mantle. Toughness 7 and -1 to enemy wound rolls means that you'd need a Banesword's Quake Cannon to wound him on any less than a 4+

The model is almost entirely the new Gravis Captain, with only the additions of the scaly loincloth that I ordered from Spellcrow (one of nine so I plan to give them to all of the Marines) and the hand emerging from the mud which was a spare component I had left lying around after giving my Eldar Corsair Felarch a power sword.






The chapter icon started off very simplistic, I thought that a downfacing triangle would work as a stylised anvil. I messed around with a small rectangle as a base for the anvil but it never really worked. Some friends suggested that it needed a little something else and I eventually settled on half of an iron halo transfer. The triangle itself is the top part of a tactical squad icon (Battleline to the new kids) from the Tome Keepers transfer sheet that came in a couple of issues of White Dwarf, the icons will appear in their entirety on the right shoulder pads of my upcoming line infantry.

The cloak took some thought as I'm not at all experienced with greenstuff besides filling in small gaps so I decided to try some Agrellan Earth texture paint on some spare Stormcast Eternals and the effect seemed to work. I tried it a little thicker on the Gravis Captain's cloak and I couldn't be happier with how it turned out.

Coming next will be the Heavy Intercessors. Watch this space...
10
Hobby / Re: They came from the trenches
« Last post by Narric on November 11, 2022, 05:03:32 am »
Cool new project, and interesting Lore :3
Pages: [1] 2 3 ... 10